Manual Horizontal Lathe
Product Features:
1.These lathes are suitable mainly for turning internal and external cylindrical, conical and other swing surface as well as various metric, inch, module and diametric pitch threads. They can also be used for broaching oil grooves and key-ways.
2.The side wall of bed is constructed with double-rib plates, and the shape of internal ribs is of box type and bevel ribs combination. The rigidity is higher than that of ordinary lathes. The precision is stable. And these lathes can carry out strong force cutting.
3.On apron, there is a device, operated by a single lever, used for rapid traverse of the carriage. Spindle's braking and rotating direction change is controlled by hydraulic system. Or by hand operation, all to user's choice.
4. On user's demand, we can equip the lathe with automatic feeding mechanism. The top slide can be used independently for turning of short cone. In combination with longitudinal feeding, it can also turn long taper surface
Technical Specifications
Unit | CW6163B | CW6263B | CW6180B | CW6280B | CW6180C | CW6280C | CW61100C | CW62100C | |||
Swing over bed | mm | 630 | 800 | 800 | 1000 | ||||||
Swing over gap | mm | --- | 800 | --- | 1000 | --- | 1000 | --- | 1200 | ||
Swing over cross slide | mm | 550 | 550 | 480 | 680 | ||||||
Distance between centers | mm | 1500/2000/3000 | 1500/2000/3000 | 1500/2000/3000 | 1500/2000/3000 | ||||||
Guideway width | mm | 550 | 550 | 600 | 600 | ||||||
Max. load capacity | T | 3 | 3 | 4 | 4 | ||||||
Spindle bore | mm | Φ104 | Φ104 | Φ104 | Φ104 | ||||||
Spindle bore taper | -- | Metric 120 MT#5 | Metric 120 MT#5 | Metric 120 MT#5 | Metric 120 MT#5 | ||||||
Spindle nose type | -- | A2-11 | A2-11 | A2-11 | A2-11 | ||||||
Spindle speed steps | -- | FWD.18 steps | FWD.18 steps | FWD.18 steps | FWD.18 steps | ||||||
Spindle speed range | 7.5-1000 | 6-800 | 5.4-720 | 5.4-720 | |||||||
Chuck | mm | Φ315 3-jaw manual | Φ315 3-jaw manual | Φ400 3-jaw manual | Φ400 3-jaw manual | ||||||
Turret/tool post | -- | Manual turret 4 position | Manual turret 4 position | Manual turret 4 position | Manual turret 4 position | ||||||
Tool shark size | mm | 30x30 | 30x30 | 32x32 | 32x32 | ||||||
X axis travel | mm | 320 | 420 | 420 | 420 | ||||||
Z axis travel | 1350/1850/2850 | 1350/1850/2850 | 1350/1850/2850 | 1350/1850/2850 | |||||||
X axis feed grade/range | mm/r | 64/0.05-12.15 | 64/0.05-12.15 | 64/0.05-12.15 | 64/0.05-12.15 | ||||||
Z axis feed grade /range | mm/r | 64/0.1-24.3 | 64/0.1-24.3 | 64/0.1-24.3 | 64/0.1-24.3 | ||||||
X axis rapid traverse | mm/min | 2300 | 2300 | 2300 | 2300 | ||||||
Z axis rapid traverse | mm/min | 4000 | 4000 | 4000 | 4000 | ||||||
Metric thread grade/range | mm | 50/1-240 | 50/1-240 | 50/1-240 | 50/1-240 | ||||||
Inch thread grade/range | TPI | 26/14-1 | 26/14-1 | 26/14-1 | 26/14-1 | ||||||
Module thread grade/range | mm | 53/0.5-120 | 53/0.5-120 | 53/0.5-120 | 53/0.5-120 | ||||||
DP thread grade/range | DP | 24/28-1 | 24/28-1 | 24/28-1 | 24/28-1 | ||||||
Tailstock quill diameter | mm | Φ100 | Φ100 | Φ100 | Φ100 | ||||||
Tailstock quill taper | -- | MT#5 | MT#5 | MT#5 | MT#5 | ||||||
Tailstock quill travel | mm | 250 | 250 | 250 | 250 | ||||||
Main spindle motor | KW | 11 | 11 | 11 | 11 | ||||||
Rapid traverse motor | KW | 1.1 | 1.1 | 1.1 | 1.1 | ||||||
Coolant pump motor | mm | 0.125 | 0.125 | 0.125 | 0.125 |
SPECIFICATION | Unit | CW61100B | CW61125B | CW61140B | CW61160B |
Swing over bed | mm | 1000 | 1250 | 1400 | 1600 |
Swing over cross slide | mm | 610 | 850 | 1000 | 1200 |
Distance between centers | mm | 1500/3000 | 1500/3000 | 1500/3000 | 1500/3000 |
Guideway width | mm | 755 | 755 | 755 | 755 |
Max. load capacity | T | 6 | 6 | 6 | 6 |
Spindle bore | mm | Φ130 | Φ130 | Φ130 | Φ130 |
Spindle bore taper | -- | Metric 140 MT#6 | Metric 140 MT#6 | Metric 140 MT#6 | Metric 140 MT#6 |
Spindle nose type | -- | A2-15 | A2-15 | A2-15 | A2-15 |
Spindle speed steps | -- | FWD.21steps | FWD.21steps | FWD.21steps | FWD.21steps |
Spindle speed range | 3.15-315 | 3.15-315 | 3.15-315 | 3.15-315 | |
Chuck | mm | Φ1000 4-jaw manual | Φ1000 4-jaw manual | Φ1000 4-jaw manual | Φ1000 4-jaw manual |
Turret/tool post | -- | Manual turret 4 position | Manual turret 4 position | Manual turret 4 position | Manual turret 4 position |
Tool shark size | mm | 45x45 | 45x45 | 45x45 | 45x45 |
X axis travel | mm | 520 | 620 | 620 | 620 |
Z axis travel | 1350/2850 | 1350/2850 | 1350/2850 | 1350/2850 | |
X axis feed grade/range | mm/r | 56/0.05-6 | 56/0.05-6 | 56/0.05-6 | 56/0.05-6 |
Z axis feed grade /range | mm/r | 56/0.1-12 | 56/0.1-12 | 56/0.1-12 | 56/0.1-12 |
X axis rapid traverse | mm/min | 1870 | 1870 | 1870 | 1870 |
Z axis rapid traverse | mm/min | 3740 | 3740 | 3740 | 3740 |
Metric thread grade/range | mm | 44/1-120 | 44/1-120 | 44/1-120 | 44/1-120 |
Inch thread grade/range | TPI | 31/28-3/8 | 31/28-3/8 | 31/28-3/8 | 31/28-3/8 |
Module thread grade/range | mm | 45/0.5-60 | 45/0.5-60 | 45/0.5-60 | 45/0.5-60 |
DP thread grade/range | DP | 30/56-1 | 30/56-1 | 30/56-1 | 30/56-1 |
Tailstock quill diameter | mm | Φ140 | Φ140 | Φ140 | Φ140 |
Tailstock quill taper | -- | MT#6 | MT#6 | MT#6 | MT#6 |
Tailstock quill travel | mm | 300 | 300 | 300 | 300 |
Main spindle motor | KW | 22 | 22 | 22 | 22 |
Rapid traverse motor | KW | 1.5 | 1.5 | 1.5 | 1.5 |
Coolant pump motor | mm | 0.125 | 0.125 | 0.125 | 0.125 |