Horizontal Lathe Configuration

- Jun 08, 2018-

A. tailstock tailstock for the installation of the top to support the workpiece, or install the drill, reamer and other tools for hole processing. Tailstock structure shown in Figure 3, it is mainly by the sleeve, tail base, base and other parts. Turn the hand wheel, adjust the sleeve telescopic a certain distance, and the tailstock can also be moved along the bed guide to the desired position to meet the requirements of different workpiece processing.

B. The bed is fixed on the bed leg, the bed is the basic support of the horizontal lathe, the function of the bed is to support the main components and make them in the work to maintain accurate relative position.

C. screw lead screw can drive the main carriage for vertical movement, used to turn the thread. Screw is a horizontal lathe in one of the main precision parts, generally do not automatically feed the screw, so long to maintain the accuracy of the screw.

D. Horizontal Lathe Light bar light bar for motorized feed movement. Through the light bar can be the movement of the feed box to the slide box, so that the tool holder for vertical or horizontal feed movement.

E. joystick joystick is a horizontal lathe control mechanism, in the left side of the joystick and the right side of the tray box with a handle, the operator can easily manipulate the handle to control the horizontal lathe spindle forward, reverse or parking.