1.Daily inspection: including hydraulic system, spindle lubrication, guide rail, pneumatic system and cooling system.
Daily inspection is detecting whether the system in normal conditions. when we test spindle lubrication , the power light and hydraulic pump should be operation normally. If the power light is not bright, you should let the spindle stop, contact with machinist to repair.
2.Weekly inspection: including machine parts and spindle lubrication system.Especially for machine parts, remove iron scrap and conduct external debris cleaning.
3.Monthly inspection: including check the power supply and air dryer.The power supply voltage is in 180v~220v under normal conditions with 50hz. If there is any abnormality, it should be measured and adjusted.The air dryer should be removed and cleaned per month.