Single column vertical lathe installation safety precautions

- Jul 20, 2018-

For a single-column vertical lathe is concerned, the following will focus on what it is to install safety precautions what so that we can know how to safely install the single-column vertical lathe, so do security operations, but also to ensure their own safety. So below, we have to expand the specific content, so stay tuned!

Technical safety measures installed single-column vertical lathe, the main contents include the following, as follows:

Technical safety measures installed single-column vertical lathe, the main contents include the following, as follows:
(1) All personnel before starting work, to conduct serious about learning, and wear good labor protection products.

(2) Installation personnel should obey the command, staff shall cooperate with each other, not blindly operate.(3) have a person in charge of the installation, and the installation responsible person to supervise the installation site, check operating conditions and job progress.
(4) Before installing the lathe, first clean up the site, requirements within the range of 5 meters around the machine, without any debris.(5) the body, lifting the motor should be present to supervise professional guidance to ensure that there is no problem, do not damage the body and motor.

(6) Single column vertical lathe during the installation process, do not allow anyone to stand beneath the heavy lifting, lifting objectsmove in order to avoid wounding.

(7) the depth probe holes, you should use a professional tool, can not be measured with a finger, to avoid danger.

(8)Near the lathe bolt, adjust the horn should be placed in order to adjust the level of the lathe.
(9)Accordance with the electrical wiring diagram to connect the circuit to avoid connection errors.
(10)To be placed on the motor direction, fast feed and direction of movement, such as lifting beams check is correct.
(11)When commissioning, should be no rotating parts of the machine before.