FACING & CENTER DRILLING MACHINE

FACING & CENTER DRILLING MACHINE

FACING & CENTER DRILLING MACHINE,The feed axis of the equipment is controlled by X, Y and Z three-axis coordinates.
Chat Now

Product Details

FACING & CENTER DRILLING MACHINE

 

I. Product introduction and characteristics

The feed axis of the equipment is controlled by X, Y and Z three-axis coordinates. It can be driven by servo motor to realize the clamping of various shaft parts at the same time. At the same time, the end face milling and drilling center hole machining are completed with high precision and high production efficiency.  Suitable for mass production of shaft parts.

II. Machine Structure

The machine bed adopts vertical structure, and the castings such as sliding table and head stock are cast by high-grade resin sand cast iron. After aging treatment, the casting has good stability. The bed is an integrated design with good rigidity. Two independent high-rigidity twin-spindle power heads are installed on the left and right positions of the bed. The control unit uses three-axis servo CNC system to control X, Y, Z, and the X and Z axis CNC slides are realized. Fast forward and backward knives and drilling feed movement, Y-axis realizes milling and drilling station interchange. On the Y-axis slide table, there is a transverse guide rail that can be adjusted according to the length of the workpiece, so as to meet the processing requirements of short workpieces and long workpieces, and there is enough space for the workpiece to be clamped by hydraulic pressure, and the end face milling is automatically performed. Drilling processing.

微信图片_20180913084315.png

Technical Data:

Items

Unit

ZXV8210-600

ZXV8210-700

ZXV8210-800

Machining length range

mm

150-600

200-700

300-800

Milling diameter range

mm

¢20-70

¢15-100

¢15-100

Single side max milling volume

mm

5

5

5

Max drilling capacity

mm

¢26

¢26

¢26

Spindle speed

rpm

1200

1200

1200

Three axes reposition accuracy

mm

0.006

0.006

0.006

Milling length consistency

mm

±0.003

±0.003

±0.003

Center hole depth consistency

mm

0.03

0.03

0.03

Runout of two ends face to center hole

mm

0.03/¢50

0.03/¢50

0.03/¢50

Roughness of end surface

Ra

3.2

3.2

3.2

Roughness of center hole

Ra

1.6

1.6

1.6


Inquiry